Filter
Top Products
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal
Configuring the Vmux-2100 System 4-11
4. Choose Confirm and save password and then re-enter the new password to
confirm the change.
5. To change the user access level, choose Change access level and then enter a
new value (Monitor, Technician, Operator or Administrator) from the Change
Access Level menu.
6. Choose Confirm and save access level and then enter the administrator
password to confirm the change.
Displaying the User List
To display a list of registered users:
• From the User Administration menu, choose Show all users.
The Show All Users screen appears (see Figure 4-13).
Show All Users
UserName Access Level DBchange Date DBchange Time
1 admin Administrator 6/3/2001 18:16:5
2 qwerty Monitor
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-13. Show All Users Screen
Controlling Telnet Access
You can disable Telnet access to Vmux-2100.
By disabling Telnet, you prevent unauthorized access to the system when security
of the Vmux-2100 IP address has been compromised. When Telnet access is
disabled, Vmux-2100 can be managed via an ASCII terminal or RADview.
To disable the Telnet access:
1. From the Management menu (Figure 4-6), choose Telnet.
The Telnet value toggles between Enable and Disable.
2. Set to ‘Disable’.