Filter
Top Products
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual
4-14 Configuring the Vmux-2100 System
Signaling Configuration
1. Signaling Profile Configuration
2. SS7 Keep-Alive Suppression Rate (0% - No Suppression / Not SS7)
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-15. Signaling Configuration Menu
2. From the Signaling Configuration menu, choose Signaling Profile
Configuration.
The Signaling Profile Configuration menu appears (see Figure 4-16).
Signaling Profile Configuration
1. Enter Profile Number To Configure [1 - 5... (1)
2. Signaling Table Configuration []>
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-16. Signaling Profile Configuration Menu
3. From the Signaling Profile Configuration menu, choose Enter Profile Number
To Configure.
4. Enter the number of the signaling profile that you want to configure by typing a
number from 1 to 5, and pressing <Enter>.
5. From the Signaling Profile Configuration menu, choose Signaling Table
Configuration.
The Signaling Table Configuration menu appears (see Figure 4-17).
Signaling Table Configuration
A Bit B Bit C Bit D Bit
ABCD BITS A B C D
IDLE SIGNAL 1 0 1 1
OOS SIGNAL 1 0 1 1
1. 0 8. NOT C
2. 1 9. D
3. A 10. NOT D
4. NOT A
5. B
6. NOT B
7. C
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit ?-help
Figure 4-17. Signaling Table Configuration Menu