Filter
Top Products
Vmux-2100 Installation and Operation Manual Chapter 4 Management from a Terminal
Configuring the Vmux-2100 System 4-7
Management
1. Host IP
2. Manager List
3. Host Mux Name ...
4. User Administration
5. Signaling Configuration
6. Telnet (Enable)
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-6. Management Menu
2. From the Management, choose Host IP.
The Host IP menu appears (see Figure 4-7).
Host IP
1. Set Host IP address ... (170.185.190.15)
2. Set Subnet Mask ... (255.255.255.0)
3. Set Default Gateway ... (170.185.190.1)
4. Trap... (public)
5. Read... (public)
6. Write...(private)
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-7. Host IP Menu
3. From the Host IP menu, choose the following:
Set Host IP address to define the host IP
Set Subnet Mask to define the subnet mask
Set Default Gateway to set the default gateway IP
Trap... to enter the name of a community to which the Vmux-2100 will
send traps
Read… to enter the name of a community with read-only authorization
Write… to enter the name of a community with write authorization.
4. Enter the desired value, and press <Enter>.