Filter
Top Products
Chapter 4 Management from a Terminal Vmux-2100 Installation and Operation Manual
4-26 Configuring Main Link and Voice E1/T1 Ports
Bundle Configuration
1. Add Bundle
2. Delete Bundle
3. Edit Bundle
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-32. Bundle Configuration Menu
3. From the Bundle Configuration menu, choose Add Bundle.
The Add Bundle menu appears.
4. Add a bundle by choosing its number.
To configure an existing bundle:
1. From the Bundle Configuration menu (see Figure 4-32), choose Edit Bundle.
The Edit Bundle menu appears (see Figure 4-33).
Edit Bundle
1. Enter Bundle Number [1 - 5]... (1)
2. Connect > (No)
3. Function> (TDMoIP)
4. Max Bytes In Multiplexed Frame [100 - 1461]... (500)
5. Destination IP... (0.0.0.0)
6. Destination Bundle[1 - 5]... (1)
7. Packetizing Interval (msec)[10 - 90]... (30)
8. Connectivity Parameters
9. TOS Parameters
10. Voice Parameters
11. VLAN Parameters
12. Bundle Name... ()
@ - Db Update; # - Db Undo
ESC-prev.menu; !-main menu; &-exit
Figure 4-33. Edit Bundle Menu
2. From the Edit Bundle menu, choose Enter Bundle Number and select a
bundle (1 through 5) to configure.
3. Configure the following parameters of the selected bundle:
Connect:
Yes (bundle is connected)
No (bundle is not connected)