Filter
Top Products
56 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Making Call Display information appear
automatically at a telephone
Each telephone that rings for an external line can display Call Display
information for that line. After the call is answered, Call Display
information is always shown at the telephone that answered the call. Your
installer or customer service representative can program telephones to have
automatic Call Display.
This feature is not available to ISDN terminals.
Changing what information is shown first about
a call
Depending on the services you subscribe to, Call Display information may
contain up to three parts: the name of the caller, the number of the caller,
or the name of the line in your Norstar system that the call is on. For each
telephone, you can determine which information is displayed first.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
.
5. Press
‘
four times.
6. Press
≠
.
7. Choose a setting at
1stDisplay:
using the
CHANGE
button. The
choices are
Name
,
Numbr
or
Line
.
You may see
Unknown name
or
Unknown number
on the display if the
information is not available from your telephone company. You may see
Private name
or
Private number
on the display if the caller blocks that
information.