Filter
Top Products
Programming Hunt Groups / 173
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Consult your customer service representative to determine your Hunt
Group number range.
Note: Your system DN must be at least three digits long to allow Hunt
Groups.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
. The display shows
Password:
.
2. Press
(the default System Coordinator password).
The display shows
Terminals&Sets
.
3. Press
‘
until the display shows
System prgrming
.
4. Press
≠
. The display shows
Hunt groups
.
5. Press
≠
. The display shows
Show group
.
6. Enter the Hunt Group number you want to program (1-6).
7. Press
≠
. The display shows
Member DNs:
.
8. Press
≠
. The display shows the members for that group.
9. Press
ADD
to add a member or press
REMOVE
to remove a member from
the group.
10. Press
to exit or
‘
to continue programming.
Moving members of a group
Member order within a Hunt Group is important. The member order
determines how a call is routed through a Hunt Group.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. At
Hunt groups
, press
≠
. The display shows
Show group
.
2. Enter the Hunt Group number you want to program (1-6) or press
‘
to scroll through the groups.
3. Press
≠
. The display shows
Member DNs:
.
4. Press
≠
. The display shows the members for that group.