Filter
Top Products
96 / Auto Attendant
Compact ICS 6.1 System Coordinator Guide P0603544 02
Programming or changing CCR
destinations
1. Press
•°‹‹
and enter the System Coordinator password
(the default password is
¤‹fl›fl
).
2. Press
NEXT
until the display shows
CCR tree
. The
choices are
SHOW,
EXIT,
and
PREV
.
3. Press
≠
. The display shows
Dial 0:
and the current
destination when the caller presses zero.
Your choices are
CHNGE
and
NEXT
.
4. Press
CHNGE
to select the appropriate destination.
Each number from zero to nine and
can direct a call to the attendant
telephone or one of the nine CCR groups. The
can be set up to make
the system play the CCR greeting again (
Repeat
). If a digit is set to
None
,
it has no destination.
Using
NEXT
and
CHNGE
, select the destinations for the remaining digits.
Testing your custom System Answer and CCR
If you have more than one external line, you can call in to hear your
greetings by dialing the number used by external callers to call the
attendant set or a line that is answered using CCR.
To call systems with only one external line, you must go to a telephone that
is not connected to your system.