Nortel Networks 6.1 Telephone User Manual


 
102 / Auto Attendant
Compact ICS 6.1 System Coordinator Guide P0603544 02
Making a speed dial call
You can quickly dial external telephone numbers that have been
programmed onto speed dial codes.
1. Press
.
2. Enter the appropriate three-digit speed dial code.
You have entered a code outside the code range
(001-255 for system, 256-279 for user).
There is no number stored on the speed dial code
you have dialed.
If you want to program a line or line pool selection
for this speed dial number, select the line or line
pool. Otherwise, enter the telephone number
exactly as if you were dialing it normally. When
you are finished, press
.
If you want to program a line or line pool selection
for this speed dial number, select the line or line
pool. Otherwise, enter the telephone number you
want to program exactly as if you were dialing it
normally. When you are finished, press
OK
.
There is no line associated with the speed dial
number you are trying to use. Select a free
external line or line pool and enter the speed dial
feature code again.
The system cannot dial the number stored.
Reprogram the number.
For other displays, see ‘‘Common feature displays’’ on page 253.
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT OK
Select a line
Unknown number