Filter
Top Products
188 / Using the Hospitality features
Compact ICS 6.1 System Coordinator Guide P0603544 02
3. Press (ADMIN). The display shows
Terminals&Sets
.
4. Press
‘
until the display shows
Hospitality
.
5. At the Hospitality heading, press
≠
until
Service time
displays.
6. Press
≠
.
Hour: 00
displays.
7. Press
CHANGE
and enter the hour (00 to 23).
If the number is less than 13, the display shows
AM
. Press
CHANGE
to select
PM
, if required. Press
OK
to accept.
8. Press
≠
.
Minutes: 00
displays.
9. Press
CHANGE
and enter the minutes (00 to 59).
Using the room/set programming
This section describes how the room occupancy and room condition
settings are used.
Setting dialing filters by room state
1. Press
2. Enter the Desk admin password if you are prompted for a password.
The set displays:
Oc of rm#:
:
3. Enter the room number and press
OK
.
The set displays
rrrrr:Vacant
.
4. Press the
CHANGE
display key and select the required status for the
room set.
5. To program other rooms, press the FIND
or
NEXT
display key and
return to step 3.
6. Press
to exit.
Note: Setting the room state to
Vacant
cancels any outstanding alarms.