Nortel Networks 6.1 Telephone User Manual


 
190 / Using the Hospitality features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Programming the alarm feature
If you want to allow the room sets to program wake-up alarms, there are a
couple of program settings that need to be entered.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
(CONFIG). The display shows
Password:
.
3. Press
(ADMIN). The display shows
Terminals&Sets
.
4. Press
until the display shows
Hospitality
.
5. Press
≠. Room/desk info
displays.
6. Press
until
Alarm
displays.
7. Press
.
Attn attempts:3
displays.
8. Press
CHANGE
until you find the number you want (1-5).
9. Press
.
Retry intrvl:4
displays.
10. Press
CHANGE
until you find the number you want (2, 4, 6, or 8).
11. Press
.
Attn duration: 15
displays.
12. Press
CHANGE
until you find the number of seconds you want (10, 15,
20, 30, 40, 50).
13. Press
.
Time format:12 hr
displays.
14. Press
CHANGE
to choose either
12hr
or
24hr
.
15. Press
.
Expired alarms
displays.
16. Press
.
Notify set:None
displays.
17. Press
CHANGE
to enter a set DN to be notified.
18. Press
.
Use tone: N
displays.
19. Press
CHANGE
to choose either
Y
(yes)
or
N
(no).
20. Press
to exit or
to continue programming.