Filter
Top Products
Using System features / 233
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Using Host System dialing signals
You can access host systems, such as private branch exchanges (PBX)
from Norstar by using host system signaling features (also known as
end-to-end signaling). These features either send a special signal to the host
system or allow you to program delays required by host systems in external
autodial or speed dial sequences.
Link
If your Norstar system is connected to a private branch exchange (PBX),
you can use a Link signal to access special features. On some telephones,
Link is called FLASH.
The Link signal can be included as part of a longer stored sequence on an
external autodial button or in a speed dial code. The Link symbol (
¤
) uses
two of the 24 spaces in a dialing sequence.
Preventing a telephone from using Link
Link can be restricted at individual telephones.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
.
5. Press
‘
three times. The display shows
Restrictions
.
6. Press
≠
twice.
7. Press
‘
three times. The display shows
Allow link:
.
8. Press
CHANGE
to choose
Y
(Yes) or
N
(No).