Filter
Top Products
Answering calls / 45
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Rings you may hear
The T7316E telephone displays a set of icons in place of flashing arrows when
it is connected to a system with version 6.1 or newer software. If you connect a
T7316E telephone to a system that is running version 6.0 or previous versions,
the standard line indicators display.
The KIM module also displays some of these icons. Note that this piece of
hardware is only supported by version 6.1 and later software.
Active call The line is active and/or you are connected to
this telephone.
Ringing A call is coming into this line.
Hold The call on this line is on Hold at this
telephone.
Call forward The call on this line has been forwarded.
Active button The feature assigned to this button is active.
Flash rate indicators for T7316e and KIM icons
On, not flashing You are connected to the call on that line or the
line is in use elsewhere or the service
indicated is active
Off The line is free
Flashing on and off for equal
lengths of time
Existing alert rate
Flashing on and off more
quickly (twinkle)
I-hold
Flashing on for longer than off
(blink)
U-hold
A double beep every 10
seconds
A call has been camped to your telephone.
A long single ring There is an external call on the line for you.
A shorter double ring There is an internal call on the line for you or
a call is being transferred to you.
A brief single ring A call is being redirected on one of your
redirected lines. You cannot answer this call.
,