Filter
Top Products
236 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Wait for Dial Tone
Wait for Dial Tone causes a sequence of numbers to pause until dial tone
is present on the line before continuing to dial. This is useful if you must
dial a remote system and then wait for dial tone from that system before
dialing the rest of your number.
The Wait for Dial Tone symbol (
‡
) uses two of the 24 spaces in an
autodial or speed dial sequence.
Displays
Using tone dialing for a call
If your external telephone lines use tone dialing, you can temporarily
switch to tone dialing by pressing
£
after selecting the line. Tone dialing
allows your Norstar telephone to communicate with devices and services
that respond to tone signals, such as automatic switchboards, and fax or
answering machines.
You have entered a code that can only be used in
a programmed autodial or speed dial sequence,
not on a call you dial directly. Programmed
Release and Run/Stop are for use in programmed
dialing sequences only.
Invalid code