Filter
Top Products
Answering calls / 51
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Cold starting the KIM
If your KIM fails, or if you want to erase programming on the KIM, there
are two types of cold start.
For both types of cold starts:
1. Unplug and replug the T7316E line cable.
The telephone will restart and all the icons will flash. When the
telephone icons stop flashing, the KIM module icons start flashing.
2. At this point, do one of the following:
• KIM single-module cold start
If you just want to cold start an
individual module, on that module,
simultaneously press the two top and
two bottom buttons on the lower button
set, as shown in the following diagram.
The KIM displays a random pattern of
icons as the KIM resets.
TIPs -
If you are cold starting an eKIM that has
line or Hunt group assignments, the cold start will
erase current programming, and insert the line
appearances, starting with the top, left button. After
all the line appearances are assigned to lines, the
system adds target line or Hunt Group
appearances. If any buttons are left, the system will
populate the buttons with autodialer assignments.
Use
to view button assignments after a
cold start.