Filter
Top Products
226 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Changing passwords
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
‘
four times.
Passwords
displays.
4. Press
≠.
Call Log pswds
displays.
5. Press
‘
until you see
Progrming pswds ˆ
.
6. Press
≠
.
Sys Admin
: displays.
7. Press
‘
until you see the name of the password you want to
change.
8. Use
≠
,
CHANGE
and the dialpad to enter the new password.
Press
OK
to accept the new password.
You cannot erase or eliminate the ability to program passwords.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in
programming. The individual can then enter a new password from his or
her telephone.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
‘
four times.
Passwords
displays.
4. Press
≠.
Call Log pswds
displays.
5. Press
‘
until the display shows
Call log pswds
.
6. Press
≠
and enter the internal telephone number of the
telephone where you want to clear the Call Log password.
7. Press
≠
, then press
CLR
to clear the password.