Filter
Top Products
Answering calls / 55
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Once you answer a call, new calls coming in on lines configured with CLID
to telephones with CLID allowed, present the prompt:
LineXXX Calling
for two rings, and then the CLID of the caller will display for three seconds
(
XXXXX
).
If the call is being forwarded, the CLID will also display the number from
which the call was forwarded (
XXXXX>YYY
).
This transient prompt will disappear if you press a programmed feature
key, external autodialer, answer key, feature key, line key, intercom key,
any dialpad key, shift key (M7310), or handsfree key. As well, an incoming
Priority call or Voice call will clear the display and display the information
for the Priority or Voice call.
Displaying Call Information before or after
answering
To find out who is calling or to display information about your current call:
1. Press
.
2. Press
or
VIEW
to display more information about an external call.
Call Display information becomes available between the first and second
ring of an incoming call. If you answer before the Call Display information
is available on your display, and you press
, you see only
the line number or line name.
Displaying Call Information for a call on hold
1. Press . The display shows
ˆSelect a call
.
2. Select the line on hold. Information about the call is displayed.
3. Press
or
VIEW
to display more information about an external call.
Tip -
If your telephone automatically displays Call
Display information for a call, you need to press
before you can press or
VIEW
to
display more information about the call.