Filter
Top Products
178 / Programming Hunt Groups
Compact ICS 6.1 System Coordinator Guide P0603544 02
6. Press
CHANGE
to change the overflow position.
7. Enter the new overflow position.
8. Press
to exit or
‘
to continue programming.
Setting the name
This setting allows you to program the Hunt Group name, such as
SERVICE or SALES. The name can be up to seven characters in length.
This name becomes the CLID display name when the DN is called.
1. At
Hunt groups
, press
≠
. The display shows
Show group
.
2. Enter the Hunt Group number you want to program (1-6) or press
‘
to scroll through the groups.
3. Press
≠
. The display shows
Member DNs:
.
4. Press
‘
. The display shows
Name:
.
5. Press
CHANGE
.
6. Using the dialpad, enter the name of the Hunt Group.
7. Press
‘
to store the name.
8. Press
to exit or
‘
to continue programming.
Allowing/disallowing an auxiliary ringer
This setting allows you to allow/disallow an external ringer to sound when
a call comes in for a specific hunt group. If you allow this service, you must
have an auxiliary ringer properly installed on your system. Refer to ‘‘Using
an auxiliary ringer’’ on page 232.
1. At
Hunt groups
, press
≠
. The display shows
Show group
.
2. Enter the Hunt Group number you want to program (1-6) or press
‘
to scroll through the groups.
3. Press
≠
. The display shows
Member DNs:
.
4. Press
‘
until the
display shows
Aux. Ringer:
.
5. Press
CHANGE
to choose
Y
(yes) to turn the ringer on or
N
(No) to
disallow an auxiliary ringer.