Filter
Top Products
Auto Attendant / 99
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Using Last Number Redial
Press to redial the last external number you dialed.
Last Number Redial records a maximum of 24 digits.
Preventing a telephone from using Last Number
Redial
Last Number Redial can be restricted at individual telephones.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
.
Enter the number you want to program onto the
button, then press
.
Enter the number you want to program onto the
button, then press
or
OK
. You may include
a line or line pool selection in an autodial
sequence by selecting the line before entering
any digits.
The number is stored on the button.
For other displays, see ‘‘Common feature displays’’ on page 253.
Tip -
If you have a programmed Last Number Redial
button, you can use Button Inquiry (
), then
press the Last Number Redial button followed by
) to
check the last number before you dial it.
Program and HOLD
Program and OK
QUIT OK
Programmed