Nortel Networks 6.1 Telephone User Manual


 
Using System features / 235
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Displays
Programmed Release
The Programmed Release feature performs same function as in a
programmed dialing sequence. When the system encounters Programmed
Release in a dialing sequence, it stops dialing and hangs up the call.
The Programmed Release symbol (
) takes up two of the 24 spaces in a
programmed dialing sequence.
The system ignores any digits or commands that follow a Programmed
Release in a programmed dialing sequence.
Run/Stop
Run/Stop inserts a break point into a sequence of dialed numbers or
characters used for automatic dialing. This may be necessary when you are
connecting to a PBX or similar host system.
For example, you can call a company with an automated attendant that
instructs you to dial the internal number you need. You can program the
company number, a Run/Stop, then the internal number on one external
autodial button. Press the autodial button once to dial the company number.
When you hear the automated attendant, press the autodial button again to
dial the internal number.
The Run/Stop symbol (
) uses one of the 24 spaces in an autodial or speed
dial sequence.
You can include up to three Run/Stop commands in a dialing string. The
system ignores a fourth Run/Stop, and any digits or commands that follow
it in a programmed dialing sequence.
At the appropriate time, press any dialpad button.
Hold each button down for as long as necessary.
Press
or
to cancel Long Tones.
Long Tones: