Filter
Top Products
Using the Hospitality features / 191
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Using the Administration set to control alarms
Only a Hospitality Services set can use this alarm administration feature.
This feature is also associated with a room number, and cannot be used on
common sets.
Use this feature to:
• query a current or last alarm time set for a room
• assign an alarm time for any room
• change an alarm time for any room
• cancel an pending alarm for any room
To program the alarm, follow these steps:
1. Press
2. Enter the Desk admin password if you are prompted for a password.
The set displays:
al of rm#
:
3. Enter the room number.
4. Press
VIEW
. The set displays
Alrm: 07:00am OFF:
.
If the alarm time is correct, press the
ON/OFF
display key.
If you want to change the time, enter a new four-digit alarm time.
If the clock uses a 24-hour format, enter an hour between 00 and 23,
and minutes between 00 and 59. The set displays:
Alarm ON hh:mm
If the clock uses a 12-hour format, enter the time, then when the set
displays:
hh:mm AM or PM?
, press
AM
or
PM
. The set displays:
Alarm ON
hh:mm
.
5. Press
to exit.