Filter
Top Products
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Common feature displays
You may see the following displays when you use a feature.
Someone is already using programming, or the
feature you are trying to use is not compatible
with the configuration of the telephone or line.
You have tried to use a feature, but you have not
been given access to it in administration
programming.
You have taken more than 15 seconds to press a
button in response to a display.
You have entered a feature code that is used by
an application program that your system does not
have.
You have entered an invalid feature code.
You have tried to use a feature that is not
available in the present setup of your Norstar
system.
You cannot use the feature you have chosen
because your telephone is locked. See ‘‘Using
Set lock’’ on page 231.
Press
£
or press
VIEW‚
or
·VIEW
t
o view a
number that is too long to fit on the display. Press
or
OK
when you are finished.
This indicates a long distance call. (May be
available with Call Display services.)
Either you are receiving an internal call from
telephone 39 forwarded by telephone 21 or you
have an Answer button for telephone 21 and an
internal call from 39 is ringing on 21.
You are connected to an internal call. Press
TRANSFER
to transfer the call.
You are receiving a call from telephone 21.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEW‚ OK
§
39>21
21
TRANSFER
21 calling