Filter
Top Products
68 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Changing handsfree for a telephone
You can program the type of handsfree used with each telephone.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
twice.
5. Press
‘
three times.
6. Choose a setting at
Handsfree:
using the
CHANGE
button.
There are three ways to set handsfree for an individual telephone:
Both Auto and standard handsfree allow you to use a headset with a Norstar
or BST telephone.
Handsfree is not available to the telephone.
You can make or answer a call without having to
pick up the handset or press the button labeled
handsfree/mute. The internal microphone and
speaker of the telephone turn on automatically
when you press a line or intercom button to make
or answer a call.
A standard version of handsfree described ‘‘Using
handsfree/mute’’ on page 65. Not available for
T7316E telephones.
This prompt appears if you attempt to use
handsfree or headset and the telephone not been
configured with
Auto
under
Handsfree
.
For other displays, see ‘‘Common feature displays’’ on page 253.
Handsfree:None
CHANGE
Handsfree:Auto
CHANGE
Handsfree:Std
CHANGE
Need Handsfree