Filter
Top Products
Auto Attendant / 101
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 001 to 255. The system
coordinator assigns numbers to System Speed Dial codes for the entire
system. See ‘‘Adding or changing a system speed dial’’ on page 31.
Adding or changing a User Speed Dial
To add or change a User Speed Dial number on your telephone:
1. Press
.
2. Enter a three-digit code from 256 to 279 that you want to associate
with a telephone number.
3. To include a line selection for this number, press the line or intercom
button. To select a line pool, press a programmed line pool button, or
press the Intercom button, and enter a line pool access code. For
M7100/T7100 telephones, you can only select a line pool.
4. Enter the number you want to program.
5. Press
or
OK
.
Displays
Tip -
There is no difference between using User Speed
Dial and using System Speed Dial. They differ only in
how you program them.
Continue entering the number you want to
program. You can change the number by pressing
BKSP
or . When you are finished,
press
or
OK
.
Enter the telephone number you want to program
exactly as you would if you were dialing it
normally. When you are finished, press
or
OK
.
256:9___
CANCL BKSP OK
Enter digits
QUIT OK