Filter
Top Products
232 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
6. Press
≠
twice.
7. Use
CHANGE
to select one of the three options:
None, Partial
and
Full
.
Using an auxiliary ringer
An auxiliary ringer is a separate device that has to be connected to Norstar.
Refer to the section on installing optional equipment in the Compact ICS
6.1 Installer Guide.
Turning the auxiliary ringer for a telephone on or
off
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
≠
at
Terminals&Sets
.
4. Enter the internal number of the telephone you want to program and
press
≠
. The display shows
Capabilities
.
5. Press
≠
.
6. Press
‘
until the display shows
Aux. ringer
.
7. Use
CHANGE
to select
Y
(Yes) or
N
(No).
Your installer or customer service representative can program the auxiliary
ringer to start ringing for incoming lines as part of Ringing Service.