Nortel Networks 6.1 Telephone User Manual


 
124 / Forwarding your calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Canceling Line Redirection
1. Press .
2. Select the lines you no longer want to be redirected.
Allowing a telephone to redirect calls
You can turn the redirect calls feature on and off.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
.
2. Press
(the default System Coordinator password).
3. Press
and enter the internal number of the telephone you
want to program.
4. Press
twice.
5. Press
three times. The display shows
Allow redirect:
.
6. Press
CHANGE
to select
Y
(Yes) or
N
(No).
Tip -
The line chosen for redirecting calls on other lines
can be used normally when it is not busy on a redirected
call. To avoid redirection failing because the chosen line
is in use, choose a line pool with several lines in it.
The system does not check that the number you give for
line redirection is a valid one. If you redirect to an invalid
number, redirection fails. Using an autodial button to
enter the redirection number helps avoid this possibility.
An autodial button used for line redirection must be
programmed to use a specific line.