Filter
Top Products
16
P0936571 02
You can also shut down the Client component from the Windows taskbar by right-clicking the
Attendant Console taskbar button and clicking the Close button.
Initializing and configuring the Client component
You must set up each PC that has the Client component installed to handle calls either as a
full-time main attendant, part-time main attendant, backup attendant, overflow attendant or
assistant attendant.
Starting the Client component for the first time
To start and set up the Client component:
1 On the taskbar, click Start, point to Programs, point to Attendant Console and click
Attendant.
The Client component starts. The first time the Client component starts after installation, the
Enter Attendant Options dialog box appears.
2 In the Attendant Extension box type the extension number of the attendant.
3 If the network has more than one Attendant Console Server running, you must enter the Server
ID for the Business Communications Manager base unit you want to use in the Server ID box.
The Server ID refers to the Windows TCP/IP host name of the Server PC. If you do not know
the Server ID, ask your System Administrator.
4 Click the OK button.
The Tip of the Day dialog box appears over the Attendant Console window.
5 Click the Close button to see the Attendant Console window (see Figure 1).