Filter
Top Products
Using the Change Extensions Command
B-14 Issue 1 June 2000
Release the Networking Ports
Release the networking ports as follows:
1. Begin at the Lucent INTUITY Administration menu, and select:
2. Press (Change Keys) to access the second set of function keys.
3. Press (Release). After you press the key, you see the Release
Networking Channel screen as shown in Figure B-8.
Figure B-8. Release Networking Channel Screen
4. Enter the number of the channel you need to release.
After you enter the number, you see the message working... in the
upper right-hand corner of the screen. When the process completes, the
Status field on the Networking Diagnostics screen updates and shows
idle for the channel you entered.
5. Repeat steps 3 through 5 for each channel you need to release.
6. When you finish releasing channels, press (Cancel) to exit the screen
and return to the Lucent INTUITY Administration menu.
7. Determine your next step:
■ If the system has the Call Accounting System (CAS) software,
continue with Chapter 2, “Conversion Instructions,” Task 15,
“Change the CAS Switch Assignment,” page 2-36.
■ If the system does not have CAS, continue with Chapter 2,
“Conversion Instructions,” Task 16, “Clear any Alarms,” page 2-37.
> Networking Diagnostics
> Diagnostics
> Customer/Services Administration
F8
F3
F6