Filter
Top Products
Channel Mapping
A-12 Issue 1 June 2000
6. Press 1 (the number 1) to start the touch tone recognition test.
The system responds:
“Enter a set of digits followed by the pound key.
The star and pound keys will not be spoken.”
7. Enter the numbers 1 2 3 4 5 on the telephone keypad.
8. Enter the pound sign.
The system responds through the telephone:
“The digits entered are 1 2 3 4 5.”
The system then returns to the main ChanTran menu, starting with:
“Press 1 to initiate...”
NOTE:
If you heard the sequence of digits that you entered and saw the
numbers entered on the System Monitor Screen, the test completed
successfully. If you did not hear the sequence of digits that you
entered or if the digits are unclear or cannot be understood, the test
has failed. Contact your remote maintenance center.
9. Press 1 (the number 1) to restart the touch tone recognition test.
10. Enter the numbers 6 7 8 9 0 on the telephone keypad.
11. Enter the pound sign.
The system responds through the telephone:
“The digits entered are 6 7 8 9 0.”
The system then returns to the main menu, starting with:
“Press 1 to initiate...”
12. Press (the number 3) to start the record and playback test.
The system responds:
“Press 1 to record message using CELP.
2
Press 2 to record message using ADPCM32.
Or, press 3 to record message using Sub-Band 16.”
13. Press 1 (the number 1) to record a message using CELP.
The system responds:
“Record test message at the tone:”
14. Record a short test message such as “Test, test, test” by speaking into the
test phone. The system stops recording automatically when you stop
speaking.
2. These are different voice encoding algorithms.