Filter
Top Products
Issue 1 June 2000 A-1
A
Channel Mapping
Overview
This appendix presents the information necessary to perform channel mapping
and acceptance testing.
NOTE:
The platform administration of channels to groups is not performed in this
release. Allow the setting to remain at 2. This Assign screen option is
reserved for future use.
Administer the INTUITY Switch
Interface
You must first Administer the INTUITY switch interface before you can map
channels to switch extensions. If you have not administered the INTUITY Switch
Interface, see Chapter 2, “Conversion Instructions,” Task 10, "Administer the
Lucent INTUITY System for Operation with the MERLIN LEGEND" on page 2-32.
Map Channels to Switch Extensions
This procedure assigns an extension number to each activated channel. Only
those channels that have been purchased and activated can be assigned.
NOTE:
Channels not purchased and activated are not displayed on the Voice
Equipment screen.