Filter
Top Products
Verify Channel State
Issue 1 June 2000
A-5
Channels are usually shipped from the factory in the facility-out-of-service (Foos)
state. When the ports detect loop current, they automatically convert to the Inserv
state.
If you have connected the ports to the switch and they remain in the Foos state,
you may have a problem with the:
■ Connection
■ Switch
■ Hardware
If you are installing a new board, you will see the manually-out-of-service state
(MANOOS). If MANOOS appears for a channel, you will need to convert it to
Inserv or Foos by using the second half of this procedure.
NOTE:
If you are already displaying the Voice Equipment screen, begin this
procedure at Step 2.
1. Starting at the INTUITY Administration menu, select:
The system responds with the Voice Equipment screen, as shown in
Figure A-4.
Figure A-4. Voice Equipment Screen
> Voice Equipment
> Voice System Administration