Filter
Top Products
1-2 Issue 1 June 2000
Conversion Checklist
Table 1-1 provides the checklist for Lucent INTUITY Release 3 System
conversion to MERLIN LEGEND and MERLIN MAGIX Integrations.
Table 1-1. INTUITY Conversion to MERLIN LEGEND and MERLIN MAGIX
Integrations
Task Description See ✔
1. Inventory Materials Page 2-3
2. Deactivate Alarm Origination Page 2-3
3. Stop the Voice System Page 2-5
4. Make an Attended Back-up Tape Page 2-6
5. Remove the Previous Switch Integration
Software
Page 2-10
6. Shutdown the System Page 2-12
7. Remove Hardware for the Previous Integration Page 2-13
8. Allow the System to Finish Booting Page 2-28
9. Install the MERLIN LEGEND Switch Integration
Software
Page 2-29
10. Administer the Lucent INTUITY System for
Operation with the MERLIN LEGEND
Page 2-32
11. Shutdown the Lucent INTUITY System Page 2-33
12. Cable the MAP and Administer the MERLIN
LEGEND Communications System
Page 2-34
13. Apply Power to the System Page 2-34
14. Test the Channels if the Mapping Changed Page 2-35
15. Change the CAS Switch Assignment Page 2-36
16. Clear any Alarms Page 2-37
17. Place Test Calls to the System Page 2-38
18. Assign the System Date and Time Page 2-38
19. Stop the Voice System Page 2-40
20. Back Up the System-Data Page 2-41
21. Start the Voice System Page 2-41
22. Activate Alarm Origination Page 2-42
23. Create a Test Alarm Page 2-45
24. Replace the Nightly Backup Tape Page 2-47
25. Remove the Old Software from the Site Page 2-47