Filter
Top Products
Contents
iv Issue 1 June 2000
MAP/40: Locate and Remove the GP Synch or DCIU Circuit
Card 2-23
MAP/40: Replace the Cover and Cables 2-24
MAP/100 Instructions 2-25
MAP/100: Open the MAP 2-25
MAP/100: Locate and Remove the GP Synch or DCIU Circuit
Card 2-26
MAP/100: Replace the Covers and Cables 2-27
Task 8: Allow the System to Finish Booting 2-28
Task 9: Install the MERLIN LEGEND Switch Integration Software 2-29
Stop the Voice System 2-29
Install the MERLIN LEGEND Switch Integration Software2-30
Start the Voice System 2-32
Task 10: Administer the Lucent INTUITY System for Operation with the
MERLIN LEGEND 2-32
Task 11: Shutdown the Lucent INTUITY System 2-33
Task 12: Cable the MAP and Administer the MERLIN LEGEND
Communications System 2-34
Task 13: Apply Power to the System 2-34
Task 14: Test the Channels if the Mapping Changed 2-35
Task 15: Change the CAS Switch Assignment 2-36
Task 16: Clear any Alarms 2-37
Task 17: Place Test Calls to the System 2-38
Task 18: Assign the System Date and Time 2-38
Task 19: Stop the Voice System 2-40
Task 20: Back Up the System-Data 2-41
Task 21: Start the Voice System 2-41
Task 22: Activate Alarm Origination 2-42
Task 23: Create a Test Alarm 2-45
Task 24: Replace the Nightly Backup Tape 2-47
Task 25: Remove the Old Software from the Site 2-47
Channel Mapping A-1
■ Overview A-1
■ Administer the INTUITY Switch Interface A-1
■ Map Channels to Switch Extensions A-1
■ Verify Channel State A-4
■ Assign Service to Channels for Testing A-8