Filter
Top Products
2-34 Issue 1 June 2000
Task 12 - Cable the MAP and Administer the
MERLIN LEGEND Communications System
To cable the MAP and Administer the MERLIN LEGEND Communication System:
1. Install the MERLIN LEGEND Communications system.
2. Administer the MERLIN LEGEND Communications system to operate with
the Lucent INTUITY system. See Chapter 5, “MERLIN LEGEND Switch
Administration,” in INTUITY Integration with MERLIN LEGEND
Communications System, 585-310-255, Issue 1.
3. Cable the Lucent INTUITY system to the MERLIN LEGEND. For
instructions, see Chapter 4, “Connectivity,” in INTUITY Integration with
MERLIN LEGEND Communications System, 585-310-255, Issue 1.
4. Continue with Task 13, “Apply Power to the System”.
Task 13 - Apply Power to the System
To apply power to the system:
1. Apply power to the system.
The system displays copyright and address information, runs memory
tests, and then rebuilds the UNIX kernel.
!
CAUTION:
Do not strike or during this process. The system
automatically proceeds to the next step.
NOTE:
You may see one of the following errors:
Fatal Error: Unknown loadable module name in system file.
Invalid checksum
Ignore these errors. They are not true errors and no action is
required.
The system then repeats the copyright and address information. This
stage ends with the message:
The system is ready.
During the next stage, the system displays a console login and then the
following message:
Automatically starting the voice system.
ENTER ESC