Filter
Top Products
Conversion Instructions
Issue 1 June 2000
2-31
You will see messages indicating the installation is still running. When the
installation is complete, you will see the following message:
Installation of Intuity MERLIN LEGEND Switch Integration Package (swin)
was successful.
Insert a diskette into Floppy Drive 1.
Type [go] when ready
or [q] to quit: (default: go)
5. Remove the diskette from the floppy drive and insert the MERLIN LEGEND
System Programming and Maintenance diskette 1.
NOTE:
Install the System Programming and Maintenance diskette 1 first.
Install diskette 2 when prompted.
6. Press to install the software.
The system responds:
Installation in progress. Do not remove the diskette.
The following pkgs are available:
1 spm Intuity MERLIN LEGEND
System Programming & Maintenance Package
(486) x.x-xx
Select package(s) you wish to process (or ‘all’ to process all packages).
(default: all) [?, ??, q]
7. Press to accept the default of all.
You will see messages indicating the installation is still running. When the
installation is complete, you see the following messages:
Installation of Intuity MERLIN LEGEND System Programming &
Maintenance Package (spm) was successful.
Insert a diskette into Floppy Drive 1.
Type [go] when ready
or [q] to quit: (default: go)
8. Remove the diskette from the floppy drive.
9. Enter q to quit.
The system displays the Software Install screen.
10. Press (Cancel) twice to reach the System Management screen.
11. Continue with “Start the Voice System“.
ENTER
ENTER
F6