Filter
Top Products
2-46 Issue 1 June 2000
Figure 2-26. AUDIX Administration Screen
2. Type test alarm-origination at the enter command: prompt at the
bottom left side of the screen.
NOTE:
If the system does not accept this command, exit the AUDIX screen
and continue with the next task.
3. Press (Enter).
The system displays the following message:
To activate the test alarm, press ENTER. This alarm
will retire itself automatically in thirty minutes.
If logged in remotely, please log off as soon as
possible after pressing ENTER.
4. Press (Enter).
The system clears the AUDIX screen field and displays an m for minor
alarm in the Alarms field at the top, center of the screen.
5. Type exit and press
The system returns to the Lucent INTUITY Administration menu.
6. Press (Cancel) until you log out of the system.
F3
F3
ENTER
F6