Filter
Top Products
Using the Change Extensions Command
B-10 Issue 1 June 2000
:
Figure B-5. Change Extension Screen
5. Enter the name of the AUDIX machine for which you are changing local
subscriber’s extension numbers. This is the only system on which this
procedure will be performed.
6. Enter the boundries of the extension numbers you are moving, that is,
enter two numbers: the beginning (smallest affected) extension number.
and the ending (largest affected) extension number. (In the example, the
100 extensions to be moved are those currently numbered between 29900
and 29999.)
7. Enter the new beginning extension number.
Here you enter the beginning number of the new block of numbers to
which the extensions named in the preceding step are to be moved. (In
the example, extension number 29900 is to be changed to 29600, and
numbers up through 29999 are to be changed to corresponding numbers
above 29600. For example, an extension 29947 becomes extension
29647.)
All other fields are display fields.
8. Press (Enter) to initiate the process.
If the system fills in the Ending With field and asks you to confirm your
intent, continue with Step 9.
F3