Filter
Top Products
Using the Change Extensions Command
B-6 Issue 1 June 2000
Changing a Block of Extensions
(with Extension Length Change)
Change the length of local extension numbers as follows:
1. Choose Switch Interface Administration from the Lucent INTUITY
Administration menu and change the entry in the Extension Length field to
reflect the new extension length.
2. From the Lucent INTUITY Administration menu, select AUDIX
Administration. At the command line enter change machine machine_
name.
Note the ranges of extension numbers as they are before modification. (If
you have a system printer, enter print display machine to get a copy
before you enter change machine.)
3. When updating remote machines, correct the Extension Length field.
4. Re-enter the prefixes, and the start and end extensions as they will be
when the conversion is completed.
5. At the enter command: prompt, enter either:
The system displays the Change Extensions screen (Figure B-4):
Full Command Version Short Command Version
change extensions ch e