Filter
Top Products
Assign Service to Channels for Testing
Issue 1 June 2000
A-9
4. Select Services to Channels.
5. Press to display the services to channels screen.
The system responds with the Assign Services to Voice Channels screen,
as shown in Figure A-9.
Figure A-9. Assign Services to Voice Channels Screen
6. Verify that the cursor is on the Service field in the Assign Service to Voice
Channels screen.
7. Press (Choices) to display all possible services.
8. Select ChanTran for all channels.
NOTE:
ChanTran is for testing purposes only. It will not support Voice Mail or
Voice Response.
9. Enter all in the Channels field.
10. Press (Save).
NOTE:
A Command Output screen verifies that the designated channels are
assigned the selected service.
11. Press (Cancel) three times to reach the INTUITY Administration menu.
12. Continue with "Test Each Channel".
ENTER
F2
F3
F6