Filter
Top Products
Conversion Instructions
Issue 1 June 2000
2-37
Task 16 - Clear any Alarms
Check the system for alarms. If the alarm has a major or a minor alarm, contact
your remote maintenance center.
NOTE:
During this stage of the conversion, the system may have active switch
alarms since the link has not yet been placed back into service. If you see
switch link alarms, continue with these procedures and check the Alarm
Log after putting the link into service.
1. Starting at the Lucent INTUITY Administration menu, select:
2. Administer the Alarm Log Display Selection screen for active alarms (A),
major, minor, and warning alarms (y), and the time just shortly before you
started the upgrade.
3. Press (Save).
4. The system displays the Alarm Log (Figure 2-19).
Figure 2-19. Alarm Log Display Screen
5. Contact your remote maintenance center for assistance with any major or
minor alarms.
> Alarm Log
> Log Administration
> Customer/Services Administration
F3