Filter
Top Products
2-2 Issue 1 June 2000
How to Use Lucent INTUITY Screens
The INTUITY system is controlled by two methods: command entry from the
INTUITY AUDIX screens and selection from the INTUITY system screens.
Two terms are used in the directions:
■ Select
■ Enter
Select
This document will instruct you to “select” certain options.
To select:
1. Highlight the choice that you want. To highlight a choice, use the up
and/or down arrow keys.
2. Press with the choice highlighted.
The system displays the next screen or requests additional information.
To exit the screen or go back to the previous screen, press CANCEL, the F6
function key. The (Cancel) key will not stop any processes. Instead, it will exit
the screen. Any information not saved ( Save) will be lost.
To log out of the system, press the (Cancel) key until you reach the Console
Login prompt.
Enter
To enter information, type in the information and press the ENTER key on the
keyboard. For example, if the instruction is “Enter 3“ then:
1. Type the number 3. The information to be typed in is shown in bold in the
instruction.
2. Press . The enter key is located on the keyboard. It is not a function
key.
Conversion Procedures
Follow the steps in these tasks in the exact order in which they appear. Failure to
follow the steps in this document in the exact order will result in a
conversion failure.
ENTER
F6
F3
F6
ENTER