Filter
Top Products
Changing a Block of Extensions (with Extension Length
Change)
Issue 1 June 2000
B-7
Figure B-4. Change Extension Screen
6. Enter the name of the AUDIX machine for which you are changing
extension numbers.
7. Enter the boundries of the extension numbers you are changing, that is,
enter two numbers: the beginning (smallest affected) extension number.
and the ending (largest affected) extension number. (In the example, the
100 extensions to be changed are those currently numbered between
9900 and 9999.)
8. Enter the new beginning extension number.
Here you enter the beginning number of the new block of numbers to
which the extensions named in the preceding step are to be changed. (In
the example, extension number 9900 is to be changed to 29900, and
numbers up through 9999 are to be changed to corresponding numbers
above 29900. For example, an extension 9947 becomes extension
29947.)
All other fields are display fields.
9. Press (Enter) to initiate the process.
The system fills in the Ending With field and asks you to confirm your
intent.
F3