Filter
Top Products
Basic Administration and Configuration
Upgrading, Rebooting, and Resyncing Your ATA Device
ATA Administration Guide 42
2
NOTE If the device has more than one Line tab, each line tab must be configured
separately. Each line tab can be configured for a different ITSP.
Advanced Configurations
Other parameters may need to be changed from the defaults, depending on the
requirements of a specific ITSP. Some of the commonly configured parameters
include the following:
• Streaming Audio Server—You can enable an external music source for music
on hold. See the “Configuring a Streaming Audio Server,” on page 90 for further
information.
• NAT Settings—You can adjust these settings to resolve issues that arise when
using a ATA on a network behind a Network Address Translation (NAT) device.
See the “Network Address Translation (NAT) and Voice over IP (VoIP),” on
page 47 for further information.
• Subscriber Information—You can configure security parameters. See the
“Secure Call Implementation,” on page 72 for further information.
• Dial Plan—You can configure a dial plan for a specific line. See the “Configuring
Dial Plans,” on page 61 for further information.
Upgrading, Rebooting, and Resyncing Your ATA Device
The administration web server supports upgrading, rebooting, and resyncing
functions through special URLs. Administrator account privilege is needed for
these functions.
Upgrade URL
The Upgrade URL lets you upgrade the ATA device to the firmware specified by
the URL, which can identify either a TFTP or HTTP server.