Filter
Top Products
ATA Routing Field Reference
LAN Setup page
ATA Administration Guide 117
A
Router tab > WAN Setup page >
VLAN Settings section
LAN Setup page
You can use the LAN Setup page to enter your LAN settings. This page includes
the following sections:
• “Networking Service section,” on page117
• “LAN Networking Settings section,” on page118
• “Static DHCP Lease Settings section,” on page118
Router tab > LAN Setup page >
Networking Service section
Maximum Uplink
Speed
The maximum bandwidth for LAN to WAN throughput.
The default is 128 kbps.
Enable VLAN Allows (yes) or prevents (no) VLAN access.
NOTE: Choose yes if your ATA device is connected to
a switch that uses VLAN tagging.
VLAN ID The VLAN tag for the VLAN to which the ATA device is
assigned.
Networking Service Options are NAT or Bridge.
NAT—the unit acts as a router and provides IP
addresses to PCs attached to the LAN port.
Bridge—The unit acts as a switch, a passthrough, and
does not give IP addresses.