Cisco Systems WRP400 Telephone Accessories User Manual


 
ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide 203
B
VoIP Caller ID
Pattern
A comma-separated list of caller number templates such
that callers with numbers not matching any of these
templates are rejected for PSTN gateway service,
regardless of the setting of the authentication method. The
comparison is applied before the access list is applied. If
this parameter is blank (not specified), all callers are
considered for PSTN gateway service.
For example: 1408*, 1512???1234.
NOTE: ‘?’ matches any single digit; ‘*’ matches any number
of digits.
The default is blank.
VoIP Access List A comma separated list of IP address templates, such that
callers with source IP address matching any of the
templates will be accepted for PSTN gateway service
without further authentication. For example: 192.168.*.*,
66.43.12.1??.
The default is blank.
VoIP Caller 1/2/3/4/
5/6/7/8 PIN
One of 8 PIN numbers that can be specified to control
access to the PSTN gateway by a VoIP Caller, when the
VoIP Caller Authentication Method
parameter is set to PIN.
The default is blank.
VoIP Caller 1/2/3/4/
5/6/7/8 DP
Index of the dial plan in the dial plan pool to be associated
with the VoIP caller who enters the PIN that matches
VoIP
Caller 1/2/3/4/5/6/7/8 PIN
.
The default is 1.