Filter
Top Products
ATA Routing Field Reference
Application page
ATA Administration Guide 118
A
Router tab > LAN Setup page >
LAN Networking Settings section
Use these network settings when using NAT.
Router tab > LAN Setup page >
Static DHCP Lease Settings section
Use these settings when using a static IP address.
Application page
You can use the Application page to set up port forwarding, DMZ, and multicast
passthrough, and to reserve ports. This page includes the following sections:
• “Port Forwarding Settings section,” on page119
• “DMZ Settings section,” on page119
• “Miscellaneous Settings section,” on page120
• “System Reserved Ports Range section,” on page120
LAN IP Address IP address of the ATA device on the LAN side.
LAN Subnet Mask IP address for subnet mask.
Enable DHCP Server Options are Yes or No for the DHCP Server to provide
an IP address.
DHCP Lease Time Provided by the DHCP Server. IP renewal process
begins when the time expires.
DHCP Client Starting IP
Address
Initial IP address the DHCP Server provides for PCs
attached to the LAN port.
Number of Client IP
Addresses
Number IP addresses available for the DHCP Server to
provide.
Enable Options are Yes or No. Default is No.
Host Mac Address Match to other device’s MAC address.
Host IP Address Match to other device’s IP address.