Filter
Top Products
2
ATA Administration Guide 35
Basic Administration and Configuration
This chapter describes the equipment and services that are required to install
your ATA device and explains how to complete the basic administration and
configuration tasks.
Refer to the following topics:
• ”Basic Services and Equipment Required” section on page 35
• ”Downloading Firmware” section on page 36
• ”Basic Installation and Configuration” section on page 36
• ”Upgrading the Firmware for the ATA Device” section on page 36
• ”Setting up Your ATA Device” section on page 37
• ”Using the Administration Web Server” section on page 38
• ”Upgrading, Rebooting, and Resyncing Your ATA Device” section on page 42
• ”Provisioning Your ATA Device” section on page 44
Basic Services and Equipment Required
To configure your ATA devices, you need the following services and equipment:
• An integrated access device or modem for broadband access to the Internet
• Internet Telephony Service Provider (ITSP) for Voice Over IP Telephone service
• You must have to following information about your account:
• SIP Proxy (IP address or name)
• Account information and Password
• Computer with Microsoft Windows XP or Windows Vista (for system
configuration)