Filter
Top Products
ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide 196
B
Use Outbound
Proxy
Enable the use of
Outbound Proxy
. If set to no, the
Outbound Proxy
parameter and
Use OB Proxy in Dialog
is
ignored.
The default is no.
Outbound Proxy SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
Use OB Proxy In
Dialog
Whether to force SIP requests to be sent to the outbound
proxy within a dialog. Ignored if the
Use Outbound Proxy
parameter is no, or if the
Outbound Proxy
parameter is
empty.
The default is yes.
Register Enable periodic registration with the
Proxy
. This parameter
is ignored if the
Proxy
parameter is not specified.
The default is yes.
Make Call Without
Reg
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
The default is no.
Register Expires Allow answering inbound calls without successful
(dynamic) registration by the unit. If proxy responded to
REGISTER with a smaller Expires value, the PAP2T will
renew registration based on this smaller value instead of
the configured value. If registration failed with an Expires
too brief error response, the PAP2T will retry with the value
given in the Min-Expires header in the error response.
The default is 3600.
Ans Call Without
Reg
Expires value in sec in a REGISTER request. PAP2T will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register
parameter is no. Range: 0 – (231 – 1) sec
Use DNS SRV Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
The default is no.
DNS SRV Auto
Prefix
If enabled, the PAP2T will automatically prepend the Proxy
or Outbound Proxy name with _sip._udp when performing
a DNS SRV lookup on that name.
The default is no.