Filter
Top Products
ATA Voice Field Reference
Info page
ATA Administration Guide 125
B
Call 1 and 2
Remote Hold
Indicates whether the far end has placed the call on hold.
Call 1 and 2
Callback
Indicates whether the call was triggered by a call back
request.
Call 1 and 2 Peer
Name
Name of the internal phone.
Call 1 and 2 Peer
Phone
Phone number of the internal phone.
Call 1 and 2 Call
Duration
Duration of the call.
Call 1 and 2
Packets Sent
Number of packets sent.
Call 1 and 2
Packets Recv
Number of packets received.
Call 1 and 2 Bytes
Sent
Number of bytes sent.
Call 1 and 2 Bytes
Recv
Number of bytes received.
Call 1 and 2
Decode Latency
Number of milliseconds for decoder latency.
Call 1 and 2 Jitter Number of milliseconds for receiver jitter.
Call 1 and 2 Round
Trip Delay
Number of milliseconds for delay.
Call 1 and 2
Packets Lost
Number of packets lost.
Call 1 and 2 Packet
Error
Number of invalid packets received.
Call 1 and 2
Mapped RTP Port
The port mapped for Real Time Protocol traffic for Call 1/2.
Call 1 and 2 Media
Loopback
Media loopback is used to quantitatively and qualitatively
measure the voice quality experienced by the end user.