Filter
Top Products
Basic Administration and Configuration
Downloading Firmware
ATA Administration Guide 36
2
• Analog phones
• UPS (uninterruptible Power Source) recommended for devices such as the
Integrated Access Device, network switch, router, and PoE switch to ensure
that your phone system continues to work during a power failure, just like your
home phone.
Downloading Firmware
Always download and install the latest firmware for your ATA device before doing
any configurations. You can find the latest firmware at www.cisco.com/go/
smallbiz.
Basic Installation and Configuration
See your the Quick Installation Guide and the User Guide the ATA model that you
are installing. If you are configuring the complete SPA9000 Voice System, also
refer to the documentation for the SPA9000 Voice System.
Upgrading the Firmware for the ATA Device
In this procedure, you install the firmware files that you downloaded previously.
STEP 1 Determine the address of the ATA device:
a. Connect an analog telephone to the Phone 1 or Phone 2 port on the ATA
device.
b. Press **** on the keypad to access the IVR menu.
c. Press 110# to determine the Internet (WAN) IP address.
STEP 2 Make a note of the IP address that is announced.
NOTE If the administration computer is connected to the Ethernet port of the ATA
device, the default IP address is 192.168.0.1.