Filter
Top Products
Provisioning Reference (WRP400)
ATA Administration Guide 227
C
LAN DHCP
<LAN_DHCP>
<LAN_DHCP>dhcp_lease,dhcp_defa
ult_lease</LAN_DHCP>
dhcp_lease: Client lease time in
minutes; numerals from 1 to 9999
dhcp_default_lease: Default lease
time in minutes; numerals from 1 to
9999
NOTE: Dhcp_default_lease allows
the Service Provider to configure the
length of the “default lease time.” By
default, the client lease time is set to
“0,” meaning 1 day.
To set the client lease time: <LAN_DHCP>
dhcp_default_lease=888 </LAN_DHCP>
To set lease time and default lease time:
<LAN_DHCP>dhcp_lease=777,dhcp_
default_lease=888</LAN_DHCP>
Switch Rate
<SWITCH_RATE>
<SWITCH_RATE>mv_switch_total_rate_li
mit,mv_switch_ingress_mcast_rate</
SWITCH_RATE>
mv_switch_total_rate_limit: Limits the
switch throughput; numerals from 1 to
200 (default is 4)
mv_switch_ingress_mcast_rate: Ingress
multicast rate in Mbps; numerals from 1 to
100 (default is 80)
NOTE: The switch rate is set by
dividing 200 by the
mv_swtich_total_rate_limit. With the
default value of 4, the throughput is
limited to 50Mbps.
MPORTANT: It is highly recommended to
keep the default switch rate settings.
Default settings hae been tested to
support the appropriate Quality of
Service for the IPTV video transmission
towards the et-top box, in addition to
maintaining the appropriate Quality of
Service of the Voice Telephony
transmission.
To set the switch rate limit to 40 Mbps and the
multicast rate to 40 Mbps:
<SWITCH_RATE>mv_switch_total_rate_
limit=5,mv_switch_ingress_mcast_rate=40</
SWITCH_RATE>
Feature/XML
Tag
Parameters Examples